다이아몬드 와이어 루프는 어떻게 작동합니까?? 절단 원리는 무엇입니까?

다이아몬드 와이어 루프 절단 (DWLC (영어)) 연마 다이아몬드 크리스탈 입자에 내장된 선을 사용하여 재료를 절단합니다.. Because diamond is the hardest, you can ensure that this cutting method will work for any material softer than diamond (almost all materials).

예를 들어, the hardness of common granite is second only to diamond, and natural stones such as marble and quartz are usually known for their hardness, which also makes diamond wire cutting the preferred method of extracting natural stone in quarries around the world.

Diamond Wire saws typically use oil and water for lubrication and cooling, and are in principle comparable to reciprocating saws and band saws, except that they use diamond particles instead of serrations to cut the sheet. A wire may consist of one or more strands braided together to form a cable. The abrasive properties of a single strand wire saw can be made by gluing synthetic diamond particles directly to the wire. Line saws are either continuous (also known as circular saws or wire saws) or oscillating (or reciprocating), and the wire itself is also commonly referred to as a “blade”.

Endless Diamond wire loop cutting produces less waste than conventional blades, which can lead to significant cost savings when dealing with expensive materials, and unlike slurry saws that use bare wire and abrasive cutting fluids (which are difficult to handle),Diamond wire loop cutting uses clean water (or oil), and some materials can even be dry cut. Another advantage of loop cutting is speed. Capable of cutting 35 받는 사람 40 square feet of granite per hour (on average), four to five times faster than previous technologies, and with minimal human effort after installation.